Paint Correction Services

ELIMINATE PAINT DEFECTS WITH

Paint Correction

What is paint correction? Paint correction, though self-explanatory, is very involved. It is a labor-intensive procedure that involves hours of machine cutting and polishing of your vehicle’s clear coat to remove defects like swirls, scratches, oxidation, & water spots.

Before After

How does paint correction work?

  • 100% Hand Car Wash
    Using PH neutral soap and a clean wash mitt and safe towel to dry.
  • Paint Decontamination
    Clay bar treatment to mechanically decontaminate the paint followed by a chemical decontamination with iron removers.
  • Cutting With Machine & Abrasive
    The cutting phase of paint correction will remove a large number of defects but it also leaves behind smaller defects and requires refining.
  • Polishing
    Polishing is required after cutting in order to refine & add gloss to the surface. It requires a different set of pads & compounds than cutting.

Restore The showrooom Shine

Choose A Correction Package

Single Stage Polish

Like New Finish

$ 350 Starting

Removes 60%+ of defects from the painted surfaces. Recommended for lightly swirled and marred vehicles.

- Wash, clay and chemically decontaminate all exterior surfaces
- One step polish is performed to remove swirl marks, oxidation, holograms/buffer trails and light scratches or imperfections.
- 2nd wash and wipe down to remove all polishing oils in order to prep for sealant.
- 3+ Month Paint Sealant (Paint, Glass, Trim, & Wheels)
**Add any “Bombshell Ceramic Coating”. Call for pricing!
5+ Hours of Work

2 Stage Polish

Better Than New Finish

$ 650 Starting

Removes 80%+ of defects from painted surfaces. Recommended for vehicles with heavier swirls, holograms and imperfections.

- Wash, clay, and chemically decontaminate all exterior surfaces
- Medium to heavy cut polish is first used to level most imperfections.
- 2nd step uses a finish polish to enhance the gloss and depth to the paint surface and remove any hazing from the 1st polishing step.
- 2nd wash and wipe down to remove all polishing oils in order to prep for sealant.
- 3+ Month Paint Sealant (Paint, Glass, Trim, & Wheels)
**Add any “Bombshell Ceramic Coating”. Call for pricing!
10+ Hours of Work

3 Stage Polish

Show Car Finish

$ 950 Starting

Removes 90%+ of defects from painted surfaces. Recommended for vehicles with major scratches, swirl marks, holograms, and imperfections. Show quality results are achieved with this level.

- Wash, clay, and chemically decontaminate all exterior surfaces
- Safely mark and wet sand any spots needed with 2500-5000 grit sandpaper.
- Heavy machine polish to remove any sanding marks and heavy imperfections.
- Medium to fine polish to remove hazing and bring gloss back to the surface.
- Finish machine polish for the ultimate depth and glossy finish.
- 2nd wash and wipe down to remove all polishing oils in order to prep for sealant.
- 3+ Month Paint Sealant (Paint, Glass, Trim, & Wheels)
**Add any “Bombshell Ceramic Coating”. Call for pricing!
15+ Hours of Work

FAQ's

There are different levels of paint correction. Depending on the amount of defects you want removed, you can choose a polish only, a cut and polish, or a cut, polish & finish. We call these "steps" or "stages" of paint correction.

Yes, you can polish your car on your own but if you don't have experience or the right tools, you take a very high risk of leaving holograms or burning the clear coat.

If you look at your car in direct sunlight and it appears dull or oxidized, you need paint correction. If you see swirls on your car left behind by machine car wash bristles, your car needs paint correction. The best way to see the severity of the paint is to stop by your local detail shop and have them show you the defects under special color-matching LED lights.

Looking for a high quality detail shop?